Aero Precision Enhanced M-LOK AR-15 Handguard Gen 2 Black – 15″

“`html

Aero Precision Enhanced M-LOK AR-15 Handguard Gen 2 – 15″

Built for shooters who demand rigidity without excess bulk, this 15″ M-LOK handguard gives you a solid mounting platform for optics, lights, and grips. The Gen 2 design improves heat dissipation and reduces weight while maintaining full compatibility with standard AR-15 uppers. Ships discreetly to all 50 states with no assembly required—ready to install out of the box.

Key Specifications

• Material: 6061-T6 aluminum with Type III hardcoat anodizing
• Length: 15″ (actual measured length: 14.85″)
• Weight: 11.2 oz (bare handguard)
• Attachment System: M-LOK slots at 1:30, 3:00, 4:30, 6:00, 7:30, 9:00 positions
• Inner Diameter: 1.72″ – clears most suppressor mounts
• Barrel Nut: Proprietary steel design with anti-rotation tabs

Feature Breakdown

The enhanced T-slot interface provides more contact area between the handguard and barrel nut compared to Gen 1, eliminating flex during aggressive handling or bipod use. Machined relief cuts along the interior reduce weight while maintaining structural integrity—critical for carbine-length gas systems where heat buildup is common. Forward-facing M-LOK slots allow direct attachment of angled grips without adapter plates.

Anodizing thickness meets MIL-A-8625F standards for abrasion resistance, tested against repeated sling swivel attachment and removal. The 1.72″ internal diameter accommodates common muzzle devices like Dead Air KeyMo or SureFire SOCOM suppressors with approximately 0.1″ clearance. No proprietary tools are needed for installation beyond a standard armorer’s wrench.

Eight discrete anti-rotation points engage the upper receiver, preventing clocking under recoil even with heavy IR devices or night vision setups. The continuous top rail maintains zero for backup iron sights while providing a seamless transition from upper receiver rail sections. All hardware is Grade 8 steel with threadlocker pre-applied at factory.

Contoured edges reduce hotspots during extended firing sessions, with radius measurements mirroring military-spec handguards. Each unit is proof-marked near the barrel nut interface for authenticity verification. Includes an indexed shim set for timing the barrel nut without guesswork.

Compatibility

• Fits all mil-spec AR-15/M4 upper receivers
• Clears low-profile gas blocks (max height: 1.3″)
• Not compatible with piston-driven systems requiring full-length rails
• Works with Aero Precision Enhanced and Standard upper receivers

Installation Overview

Remove existing handguard and barrel nut. Slide the new barrel nut onto the barrel threads and torque to 35-40 ft-lbs using the included shims for proper timing. Align the handguard’s anti-rotation tabs with corresponding slots on the barrel nut, then secure with the eight provided screws in a cross pattern. Final check for rail alignment with upper receiver before use.

FAQ

Q: Does this work with a .750″ low-profile gas block?
A: Yes, clears most .750″ blocks with approximately 0.15″ clearance.

Q: Is the barrel nut compatible with standard armorer’s wrenches?
A: Uses a proprietary nut design—installation tool included.

Q: Will this fit a carbine-length gas system?
A: Yes, designed specifically for carbine and mid-length systems.

Q: Can I attach a bipod directly to the M-LOK slots?
A: Requires M-LOK bipod adapter (not included).

Q: Does the finish match Aero Precision uppers?
A: Yes, same Type III anodizing process for consistent color.

Warranty & Shipping

Lifetime warranty against manufacturing defects. Ships via USPS Priority or UPS Ground with tracking provided within 24 hours of order confirmation. All packaging is nondescript per our standard discreet shipping policy.

“`nn